Go to homepage
€0.00
Menu

Filter

Filter products

54 Products
Image of a J-Link Supply Adapter, featuring a green circuit board with multiple solder points and connectors. The adapter is designed for interfacing with J-Link devices, essential for programming and debugging embedded systems.
Supply Adapter

The J-Link Supply Adapter provides a fixed I/O voltage level for VTRef. It eliminates the need to connect VTRef (pin1) to the target. For additional product information, please visit segger.com.

€68.00
Details
A green circuit board named "SEGGER Target Supply Adapter" featuring various electronic components including resistors and a microchip. It has connectors on both ends, indicating its use for connecting with different devices. The design focuses on functionality for electronic development and testing.
Target Supply Adapter

The J-Link Target Supply Adapter provides a default voltage of 3.3 V to power the target using pin 19. The voltage can be adjusted by replacing resistors.For additional product information, please visit segger.com.

€68.00
Details
A green printed circuit board adapter labeled "SEGGAR AVR PDI" with multiple pins for connections. It features a central black connector, a red power jumper, and several small electronic components. The adapter is designed for programming AVR microcontrollers.
AVR PDI Adapter

Adapts from the standard 20 pin 0.1" J-Link connector to the 6-pin 0.1" AVR PDI connector, 6-pin 0.05‘‘ AVR PDI connector or 10-pin 0.1‘‘ AVR PDI connector.Additionally, a 5V or 3.3V power supply for the target is integrated.For additional product information, please visit segger.com.

€68.00
Details
Image of a SEGGER Flying Wire Adapter, a small green printed circuit board with a connector at the top. The board features labeled pins for various functions, including GND, VREF, and TCK/SWDO. This adapter is used for programming and debugging embedded systems.
Flying Wire Adapter

Adapts from the standard 20 pin 0.1" J-Link connector to a 10-pin row, allowing to connect J-Link to target PCBs via flying wires.Especially useful when hooking up prototype HW where no final connector is decided yet. Or for manually connecting a J-Link to ST Discovery boards.For additional product information, please visit segger.com.

€68.00
Details
Image of an ARM14-pin adapter, featuring a green top section with pins and the brand logo. It connects to a flat ribbon cable on one side, transitioning to a connector on the other side. The adapter is used for electronic and programming applications.
ARM-14 Adapter

Adapter for Arm targets with 14-pin JTAG connector.Incl. 14-pin ribbon cableFor additional product information, please visit segger.com.

€68.00
Details
Image of a ribbon cable connector featuring a green circuit board on one side with metal pins and a flat, gray ribbon cable extending from the opposite side. The design is typical for electronic connections, used for data transfer between devices.
14-Pin TI Adapter

Adapts from .1" 20-pin Standard connector to 14-pin TI connector incl. 14-pin cableFor additional product information, please visit segger.com.

€49.00
Details
An image of a cable with two connectors, one side featuring a green circuit board labeled "J-LINK PPC-14" from SEGGER, and the other side showing a gray ribbon connector. The cable is designed for programming and debugging electronic devices.
PPC 14-Pin Adapter

Adapts from 20-pin, 0.1 inch Standard connector to 14-pin, PPC connector incl. 14-pin cableAdditional Product Information on segger.com

€49.00
Details
Image of a J-Link Microchip Adapter. The adapter features a green circuit board with pins and markings, connected to a gray cable ending in a small rectangular connector. It is used for programming or debugging microcontrollers.
Microchip LVP Adapter

Adapts from the standard J-Link 20-pin 0.1" target connector to Microchip RJ11 modular debug connector. Incl. 6-pin RJ11 modular connector cable.For additional product information, please visit segger.com.

€49.00
Details
A J-Link RX-FINE interface adapter with two connectors attached to a ribbon cable. The left connector is green with pin configurations, and the right connector is gray with a locking mechanism. The image highlights the adapter's design for connecting debugging equipment.
RX FINE Adapter

Adapts from 20-pin, 0.1‘‘ standard J-Link connector to 14-pin, 0.1" RX FINE connector. Incl. 14-pin cable.For additional product information, please visit segger.com.

€49.00
Details
An electronic J-Link 2mm adapter is displayed against a plain background. The adapter features a green printed circuit board with multiple metal pins on one end and a connector on the opposite end, labeled for identification.
2mm Adapter

Adapts from 20-pin, 0.1‘‘ standard J-Link connector to 20-pin, 2mm connector.For additional product information, please visit segger.com.

€49.00
Details
Image of a J-Link Signal Smoothing Adapter, which is a small green circuit board with metal connectors on each side. It features printed text indicating its name and a website, with multiple pins visible for connectivity. The board is placed on a plain white background.
Signal Smoothing Adapter

The J-Link Signal Smoothing Adapter can be inserted between the J-Link debug probe and the debug target to overcome signal integrity issues.For additional product information, please visit segger.com.

€49.00
Details
An Intel FPGA adapter is shown, featuring a green circuit board with multiple pins on one end and a flat ribbon cable on the other. The adapter is designed for connecting to FPGA devices and includes a manufacturer's logo and website link.
Intel FPGA Adapter

The Intel FPGA Adapter (formerly J-Link Altera Adapter) connects to the 10-pin Intel FPGA JTAG connector providing debug access to FPGA based MCU cores like the dual-core ARM Cortex-A9 in the Cyclone V devices.Incl. 10 pin ribbon cableFor additional product information, please visit segger.com.

€49.00
Details
An electronic adapter labeled "J-Link SiLabs C2 Adapter" connects two ribbon cables. One end features a printed green circuit board with pins, while the other end has a connector housing. The image showcases the adapter's design and functional connections.
SiLabs C2 Adapter

Adapts from 20-pin, 0.1 inch J-Link connector to 10-pin, 0.1 inch SiLabs 8051 C2 connector.Incl. 10-pin cable.For additional product information, please visit segger.com.

€49.00
Details
The image features a J-Link Xilinx adapter, a small, green circuit board with pins for connection on one end and a flat ribbon cable extending from the other. The adapter is used for programming and debugging in electronics projects.
Xilinx Adapter

Adapts from the standard J-Link 20-pin 0.1" target connector to Xilinx 14 pin 2 mm connector (comp. Platform Cable USB II).Incl. 14 pin 1 mm ribbon cableFor additional product information, please visit segger.com.

€49.00
Details
The image shows a programming device labeled "Flasher Pro" with a blue rubber casing. Attached is a green circuit board connected via a ribbon cable, used for programming and debugging electronic devices. The interface includes indicator lights and a programming button.
RL78 Adapter

Adapts from the standard J-Link 20-pin 0.1" target connector to Renesas 14-pin E1 connectorFor additional product information, please visit segger.com.

€49.00
Details
An electronic adapter board labeled "SEGGER STM8 Adapter" featuring various pin connectors, a small switch, and components for signaling. The board is primarily green with silkscreened details and is used for interfacing with STM8 microcontrollers.
STM8 Adapter

The SEGGER STM8 Adapter is required to connect the Flasher ATE, Flasher Pro and Flasher Portable PLUS with STM8 target boards. The adapter enables connections via SWIM connector, and the 10-pin 0.1"-pitch connector.For additional product information, please visit segger.com.

€49.00
Details
Image of a small green circuit board featuring connectors and labels. It is identified as a "J-Link Microchip 2-Wire JTAG TDI Adapter." The board includes a series of gold pins, with numbers indicating connection points. A website link is printed on the surface.
Microchip 2-Wire JTAG TDI Adapter

Adapts from J-Link .1" 20-pin connector to Microchip .1" 6-pin connector.Package content 20-pin to 6-pin adapter .1" 6-pin ribbon cable (21 cm) For additional product information, please visit segger.com.

€49.00
Details
Image features a SEGGER SIFive-ARTY programming adapter. The adapter has a green circuit board with multiple gold pins at the top and a black connector at the bottom, designed for interfacing with development boards. It is shown from a frontal view against a plain background.
SiFive-ARTY Adapter

The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board provides several identical headers where the JD header is used as the debug connector, when running SiFive RISC-V bitstreams on the ARTY board.For additional product information, please visit segger.com.

€49.00
Details
Image of a SEGGER AVR SPI adapter featuring a green circuit board with various electronic components, connectors, and pins. The adapter is typically used for programming and debugging AVR microcontrollers. The design includes labels for power and signal pins.
AVR SPI Adapter

Adapts from the standard 20 pin 0.1" J-Link connector to the 6-pin 0.1" AVR SPI connector, 6-pin 0.05‘‘ AVR SPI connector or 10-pin 0.1‘‘ AVR SPI connector.Additionally, a 5V or 3.3V power supply for the target is integrated.For additional product information, please visit segger.com.

€49.00
Details
Image of a SEGGER 50-Mil 10-Pin Patch Adapter. The adapter is a small, rectangular green circuit board with a black connector on one end. It features labeled pins for connections, including RESET, GND, and TCK, providing interface capabilities for programming and debugging electronic devices.
50-Mil 10-Pin Patch Adapter

Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the 20-pin and 10-pin side. For additional product information, please visit segger.com.

€49.00
Details
Image of a SEGGER RAFF Adapter. It features a small green circuit board with two black connectors on opposite sides, including a series of metal pins in the center. The words "SEGGER RAFF Adapter" are printed on the green background. Image shows a small electronic adapter board with multiple pin connections on one side labeled "SEGGER J-Link Adapter." The board is primarily dark with green edges, designed for interfacing with other electronic components.
Right Angle (RAFF) Adapter

The RAFF Adapter is a Right Angle Female to Female adapter. It is a 1:1 adapter and therefor does not change the pinout and can be used as a replacement of the standard IDC ribbon cable. A compact debug or programming solution can be achieved with a J-Link Compact or Flasher Compact and the RAFF adapter plugged into a straight/vertical PCB pin header on the target application board.For additional product information, please visit segger.com.

€49.00
Details
An Infineon AUTO-20 Adapter is shown. It features a rectangular black connector attached to a green circuit board with pins, leading to a flat, multi-stranded ribbon cable. The other end of the cable has a smaller connector. The background is plain white. An Infineon AUTO-20 adapter is displayed, featuring a small rectangular green circuit board with multiple metal pins on one side. The text "Infineon AUTO-20 Adapter" is visible, along with labels "Probe" and "Target," indicating its use for electronic connections.
Infineon AUTO-20 Adapter

The SEGGER Infineon AUTO-20 Adapter allows a JTAG connection to a target hardware system, which has an Automotive Connector. It adapts from the 20-pin 0.1'' JTAG connector to a 19-pin 0.05'' Samtec FTSH connector.The SEGGER Infineon AUTO-20 Adapter can be used to connect the Flasher to Infineon AURIX™ -TC3xx microcontrollers. It may also be used to connect the Flasher to a different target as far as the target connector uses the same pinout as shown.For additional product information, please visit segger.com.

€49.00
Details
Image of an Infineon DAP-10 Adapter, featuring a rectangular green circuit board with pin connectors on top. Below, a short, flexible cable with a connector is visible, extending out to the right. The adapter is designed for electronic connections and debugging. A green circuit board adapter labeled "Infineon DAP-10 Adapter" at the center. It features several gold-plated pins on the top and a small connector at the bottom. The website "www.segger.com" is printed in white along the lower edge.
Infineon Aurix DAP-10 Adapter

The Infineon Aurix DAP-10 Adapter allows an OCDS DAP connection to a target hardware system that has a DAP connector. It adapts from the SEGGER 20-pin target interface connector to a 10-pin 0.05'' Samtec FTSH (e.g. FTSH-105-01-L-DV-K) connector. Ribbon cable (15 cm) included. For additional product information, please visit segger.com.

€49.00
Details
Image shows a Renesas 10-pin adapter with a green circuit board connector on the left and a white connector on the right. A multicolored ribbon cable connects the two, showcasing various colored wires. The image highlights the adapter's practical application in electronic connections.
Renesas M16C Family 10-Pin Adapter

Adapts from the standard 20-pin connector of Flasher Pro to target hardware which uses a Renesas 10-pin programming connector.For additional product information, please visit segger.com.

€49.00
Details
This website uses cookies to ensure the best experience possible. More information...
Privacy policy | Imprint