Go to homepage
€0.00
Menu

Filter

Filter products

38 Products
The image shows a programming device labeled "Flasher Pro" with a blue rubber casing. Attached is a green circuit board connected via a ribbon cable, used for programming and debugging electronic devices. The interface includes indicator lights and a programming button.
RL78 Adapter

Adapts from the standard J-Link 20-pin 0.1" target connector to Renesas 14-pin E1 connectorFor additional product information, please visit segger.com.

€49.00
Details
An electronic adapter board labeled "SEGGER STM8 Adapter" featuring various pin connectors, a small switch, and components for signaling. The board is primarily green with silkscreened details and is used for interfacing with STM8 microcontrollers.
STM8 Adapter

The SEGGER STM8 Adapter is required to connect the Flasher ATE, Flasher Pro and Flasher Portable PLUS with STM8 target boards. The adapter enables connections via SWIM connector, and the 10-pin 0.1"-pitch connector.For additional product information, please visit segger.com.

€49.00
Details
Image of a small green circuit board featuring connectors and labels. It is identified as a "J-Link Microchip 2-Wire JTAG TDI Adapter." The board includes a series of gold pins, with numbers indicating connection points. A website link is printed on the surface.
Microchip 2-Wire JTAG TDI Adapter

Adapts from J-Link .1" 20-pin connector to Microchip .1" 6-pin connector.Package content 20-pin to 6-pin adapter .1" 6-pin ribbon cable (21 cm) For additional product information, please visit segger.com.

€49.00
Details
Image features a SEGGER SIFive-ARTY programming adapter. The adapter has a green circuit board with multiple gold pins at the top and a black connector at the bottom, designed for interfacing with development boards. It is shown from a frontal view against a plain background.
SiFive-ARTY Adapter

The SEGGER SiFive-ARTY Adapter allows debug connections between J-Link and the ARTY board running SiFive RISC-V core bitstreams. The ARTY board provides several identical headers where the JD header is used as the debug connector, when running SiFive RISC-V bitstreams on the ARTY board.For additional product information, please visit segger.com.

€49.00
Details
Image of a SEGGER AVR SPI adapter featuring a green circuit board with various electronic components, connectors, and pins. The adapter is typically used for programming and debugging AVR microcontrollers. The design includes labels for power and signal pins.
AVR SPI Adapter

Adapts from the standard 20 pin 0.1" J-Link connector to the 6-pin 0.1" AVR SPI connector, 6-pin 0.05‘‘ AVR SPI connector or 10-pin 0.1‘‘ AVR SPI connector.Additionally, a 5V or 3.3V power supply for the target is integrated.For additional product information, please visit segger.com.

€49.00
Details
Image of a SEGGER 50-Mil 10-Pin Patch Adapter. The adapter is a small, rectangular green circuit board with a black connector on one end. It features labeled pins for connections, including RESET, GND, and TCK, providing interface capabilities for programming and debugging electronic devices.
50-Mil 10-Pin Patch Adapter

Adapts from the standard 20 pin 0.1" J-Link connector to the standard 10-pin 0.05" Cortex-M connector that is also used on many non-Cortex-M designs but with non-standard pinout. This adapter allows custom connections/wiring between the 20-pin and 10-pin side. For additional product information, please visit segger.com.

€49.00
Details
Image of a SEGGER RAFF Adapter. It features a small green circuit board with two black connectors on opposite sides, including a series of metal pins in the center. The words "SEGGER RAFF Adapter" are printed on the green background. Image shows a small electronic adapter board with multiple pin connections on one side labeled "SEGGER J-Link Adapter." The board is primarily dark with green edges, designed for interfacing with other electronic components.
Right Angle (RAFF) Adapter

The RAFF Adapter is a Right Angle Female to Female adapter. It is a 1:1 adapter and therefor does not change the pinout and can be used as a replacement of the standard IDC ribbon cable. A compact debug or programming solution can be achieved with a J-Link Compact or Flasher Compact and the RAFF adapter plugged into a straight/vertical PCB pin header on the target application board.For additional product information, please visit segger.com.

€49.00
Details
An Infineon AUTO-20 Adapter is shown. It features a rectangular black connector attached to a green circuit board with pins, leading to a flat, multi-stranded ribbon cable. The other end of the cable has a smaller connector. The background is plain white. An Infineon AUTO-20 adapter is displayed, featuring a small rectangular green circuit board with multiple metal pins on one side. The text "Infineon AUTO-20 Adapter" is visible, along with labels "Probe" and "Target," indicating its use for electronic connections.
Infineon AUTO-20 Adapter

The SEGGER Infineon AUTO-20 Adapter allows a JTAG connection to a target hardware system, which has an Automotive Connector. It adapts from the 20-pin 0.1'' JTAG connector to a 19-pin 0.05'' Samtec FTSH connector.The SEGGER Infineon AUTO-20 Adapter can be used to connect the Flasher to Infineon AURIX™ -TC3xx microcontrollers. It may also be used to connect the Flasher to a different target as far as the target connector uses the same pinout as shown.For additional product information, please visit segger.com.

€49.00
Details
Image of an Infineon DAP-10 Adapter, featuring a rectangular green circuit board with pin connectors on top. Below, a short, flexible cable with a connector is visible, extending out to the right. The adapter is designed for electronic connections and debugging. A green circuit board adapter labeled "Infineon DAP-10 Adapter" at the center. It features several gold-plated pins on the top and a small connector at the bottom. The website "www.segger.com" is printed in white along the lower edge.
Infineon Aurix DAP-10 Adapter

The Infineon Aurix DAP-10 Adapter allows an OCDS DAP connection to a target hardware system that has a DAP connector. It adapts from the SEGGER 20-pin target interface connector to a 10-pin 0.05'' Samtec FTSH (e.g. FTSH-105-01-L-DV-K) connector. Ribbon cable (15 cm) included. For additional product information, please visit segger.com.

€49.00
Details
Image shows a Renesas 10-pin adapter with a green circuit board connector on the left and a white connector on the right. A multicolored ribbon cable connects the two, showcasing various colored wires. The image highlights the adapter's practical application in electronic connections.
Renesas M16C Family 10-Pin Adapter

Adapts from the standard 20-pin connector of Flasher Pro to target hardware which uses a Renesas 10-pin programming connector.For additional product information, please visit segger.com.

€49.00
Details
The image features a green circuit board adapter labeled "STDC14 Adapter," with several pins and switches, connected to a flat ribbon cable. The cable has multiple wires and ends in a connector, used for electronic component connections.
STDC 14 Adapter

Adapts from the 20-pin 0.1" J-Link / Flasher debug connector to a 14-pin 0.05'' connector as defined by ST.For additional product information, please visit segger.com.

€49.00
Details
A segmented ribbon cable adapter is shown, featuring a green circuit board labeled "RH850 Adapter" on one end and a gray connector on the other. The adapter has pins arranged on the circuit board, designed for connecting devices in a technical setup. Image features a SEGGER RH850 adapter, showcasing a green printed circuit board with gold contacts. The adapter is designed for connecting devices, labeled with "SEGGER," "RH850," and the website "www.segger.com." The layout includes two rows of pins and one opening on the side.
RH850 Adapter

Adapts from .1" 20-pin Standard connector to 14-pin RH850 connector. For additional product information, please visit segger.com.

€49.00
Details
A printed circuit board connector is shown on the left, featuring multiple metal pins. Attached to the connector is a flat ribbon cable, which leads to a smaller connector on the right. The background is plain white.
19-Pin Cortex-M Adapter

Adapts from .1" 20-pin Standard connector to .05" 19-pin Cortex-M connector incl. 19-pin cableFor additional product information, please visit segger.com.

€32.00
Details
Image shows a circuit board adapter with several rows of metal pins on one side, connected by a wire to a smaller connector. The adapter is designed for interfacing with electronic components.
9-Pin Cortex-M Adapter

Adapts from .1" 20-pin Standard connector to .05" 9-pin Cortex-M connector incl. 9-pin cableFor additional product information, please visit segger.com.

€32.00
Details
This website uses cookies to ensure the best experience possible. More information...
Privacy policy | Imprint